Filter
Top Products
Operating instructions
27
Starting a washing programme
In this fully integrated appliance the controls are located on the top of
the door. When selecting a programme, the door needs to be open.
1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Press the On/Off button
The indicator lights of the programme selection buttons illuminate.
4. Setting and starting the programme
To select a programme, press the button of the programme you
wish to select (see "Washing programmes" chart).
The corresponding indicator light remains illuminated while the
other programme buttons indicator lights turn off.
In the digital display will appear, flashing, the running time (in
minutes) of the programme that has been set.
Close the dishwasher’s door, the programme will start
automatically.
Setting and starting the programme with the delay start
Once the washing programme has been selected press the delay
start button, the corresponding indicator light will illuminate and
1h appears in the digital display.
Press the delay start button until the number of hours desired
(from 1 hour up to 19 hours) appear in the digital display.
Close the dishwasher door, the countdown starts automatically and
will decrease with steps of 1 hour.
The opening of the door will not modify or interrupt the
countdown.
Once the delay start has elapsed the washing programme will start
automatically.
NOTE: The start of the programme or the countdown of the delay
start will occur only after the closure of the door, until this
moment it is possible to modify the set made.
152955 36/0en 11-04-2005 12:25 Pagina 27