Filter
Top Products
Tips on cooking and frying18
Tips on cooking and frying
3
Information about acrylamides
According to the latest scientific research, intensive browning of food, especially in
products containing starch, may present a health risk due to acrylamide. Therefore we
recommend cooking at low temperatures and not browning foods too much.
Cookware for induction cooking zones
Cookware material
3 Cookware for induction cooking zones is labelled as suitable by the manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to heat setting 9 is heated
within a short time.
• ... a magnet sticks to the bottom of the cookware.
3 Certain cookware can make noises when being used on induction cooking zones.
These noises are not a fault in the appliance and do not affect operation in any way.
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom of the cook
ware up to a certain limit. However the magnetic part of the bottom of the cookware
must have a minimum diameter depending upon the size of the cooking zone.
Cookware with a bottom with a diameter of less than 12cm is not suitable.
Tips on energy saving
2 Place cookware on the cooking zone before it is switched on.
2 If possible, always place a lid on the cookware.
Cookware material Suitable
Steel, enamelled steel yes
Cast iron yes
Stainless steel if appropriately labelled by the manufacturer
Aluminium, copper, brass
Glass, ceramic, porcelain