Filter
Top Products
9Operating the appliance
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
3 After switching on, within approx. 10 seconds a heat setting or a function must
be set, otherwise the appliance automatically switches itself off.
Selecting the heat setting
3 The keep warm setting u lies between ¾ and ¿. It is used to keep food warm.
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.
3 Timer functions are not stopped by .
3 locks the whole control panel except the sensor field .
Control panel Display Pilot light
Switch on Touch for 2 seconds ¾ / h lights up
Switch off Touch for 1 second h / none goes out
Control panel Display
Increase Touch u to Ç / p
Decrease Touch Ç to ¾
Switch off Touch and at the same time ¾
Control panel Display
To switch on Touch u
To switch off Touch heat setting that was previously
set (not automatic warm up func
tion)