Filter
Top Products
25
What to do if ...
Important: regularly check on the red temperature pilot light and
thermometer to establish that the storage temperature is being main-
tained.
The compressor runs con-
tinuously
Temperature is set too
cold.
Turn the thermostat con-
trol knob to a warmer set-
ting temporarily.
Heavy build up of frost,
possibly also on the door
seal.
Door seal is not airtight
(possibly after reversing
the door).
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.
Symptom Possible Cause Remedy
The freezer temperature is
not sufficient, red light
lights up, temperature
alarm signal sounds.
Temperature is not proper-
ly adjusted.
A large quantity of warm
food placed in the appli-
ance within the last 24
hours.
Please look in the “Initial
Start Up” section.
Press the fast freeze but-
ton.
Open the door only as long
as necessary. Press the fast
freeze button.
Door was open for an
extended period.
The appliance is near a
heat source.
Please look in the
“Installation Location”
section.
The compressor starts after
a period of time.
This is normal, no error has
occurred.
The compressor does not
start immediately after
changing the temperature
setting.
Appliance works , green light
blinks
technical Problem
Please inform your customer
service