Filter
Top Products
Do not put the food into the appliance until RAPID HEAT UP function is completed and
the appliance operates with the set function.
1. Set the oven function.
2. If necessary, change the recommended temperature.
3. Use
. The display shows .
If the heat indicator bars flash one after the other, RAPID HEAT UP function is on.
If the appliance is at the set temperature, the heat indicator bars are on.
You can hear an acoustic signal. The display stops to show
.
The appliance continues to heat in the set oven function and oven temperature.
4. Put the food in the appliance.
If you generally prefer to put food into a pre-heated oven, you can switch on RAPID
HEAT UP function permanently (refer to SETTINGS MENU ). Then you can switch off RAP-
ID HEAT UP function with the button
.
Clock functions
SYMBOL FUNCTION DESCRIPTION
MINUTE MINDER To set a countdown (max. 99 minutes). This function has
no effect on the operation of the appliance.
DURATION To set how long the appliance has to be in operation.
END To set the switch-off time for an oven function.
You can use DURATION and END at the same time, if the
appliance is to be switched on and off automatically later.
TIME OF DAY To set, change or control the time of day.
• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5
seconds, touch
or to set the time.
• If you set the time, the symbol continues to flash for approximately 5 seconds. After
these 5 seconds, the symbol comes on. The time starts to count down.
• If you do not set one of the clock functions MINUTE MINDER
, DURATION or
END
, the display shows the duration of the oven function.
If you use the clock functions DURATION and END , the appliance switches off
the heating elements when 90% of the time is completed. The appliance uses the residu-
al heat to continue the cooking process until the time is completed (3-20 minutes).
Setting the clock functions
1. Set the oven function (not necessary for MINUTE MINDER and TIME OF DAY ).
2. Use
again and again until the display shows the necessary clock function and the
related symbol, for example MINUTE MINDER
.
3. Use
or to set the necessary time.
You can hear an acoustic signal for 2 minutes when the time is completed. The appli-
ance switches off.
“00.00” and the related function indicator flash.
4. Use any button to switch off the acoustic signal.
18
Daily use