Filter
Top Products
20
How to make option adjustments (Integrated models and Prefinished models with no LCD)
Follow the
steps below
Rinse Agent
setting
Water Softener
setting
1
Auto Power
option
End of Wash
Program
Beeps option
Closed
Drawer
option Clean Dish
Dry
Enhancement
Mode option
2
First
Enter Option Adjstment Mode
1
Press the button to turn power on.
2
Press and hold the and / buttons for 5 seconds until one long beep sounds.
Press the
button to
scroll through
options
Prefinished no LCD
red / off blue / off purple / on blue / on red / on OPTION ONLY
AVAILABLE ON
DD603, DS603
MODELS
purple / on
Integrated models
red / off green / off orange / on green / on red / on orange / on
Make an
adjustment
The current setting is shown on the
wash program selector in red lights.
If four red lights are lit, the option
selected setting is set to four.
Press the
/ button to increase
the setting.
Press the
/ button to turn the selected option on or off.
Save
Press the button to save the change.
Example
Rinse agent
setting set to four
Water Softener
setting set to four
On
Off
On
Off
On
Off
OPTION ONLY
AVAILABLE ON
DD603, DS603
MODELS
On
Off
1
Non-water softener models - the water softener setting does not appear in the sequence of options.
2
The option sequence will start again from the Rinse Agent setting.