Filter
Top Products
25
Trouble shooting
Problem Possible Cause What to do
Continuous
beeping
A fault has occured. Refer to the Fault codes section.
Intermittent
beeping
DishDrawer® is in pause
mode.
Close the DishDrawer® and press the
button.
DishDrawer® will
not start
Power supply is not
connected.
Connect the power supply.
The drawer is not properly
closed.
Ensure the drawer is firmly closed.
Lock feature is on.
Turn the Lock off. Hold down the
/ button until the symbol
disappears from the LCD or the light
above the
/ button disappears.
button not pressed. Press the button.
Excess water in
the DishDrawer®
Drain hose(s) bent or
kinked.
Straighten the drain hose(s).
Blocked filters and/or drain
hose(s).
Clean the filter plate/drain filter. Unblock
the drain hose(s). Refer to the user
maintenance section.
Water marks on
the dishes
Insufficient rinse agent. Ensure there is enough rinse agent in
the dispenser.
Rinse agent setting too
low.
Increase the rinse agent setting.
DishDrawer® overloaded/
incorrectly loaded.
Refer to the section on loading.
Insufficient or no salt in the
water softener.
Ensure there is enough salt in the water
softener and/or increase the water
softener setting.
Dishes did not
dry
Incorrect loading. Ensure the dishes are not nesting
together.
Rinse agent depleted. Refill the rinse agent dispenser.
Rinse agent setting too
low.
Increase the rinse agent setting.
Eco wash program used. Choose a standard wash program.