Electrolux E30EW75GSS Oven User Manual


 
32
Electronic Control Settings
USER PREFERENCES
(CONTINUED)
SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS
The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven
has been preset at the factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit:
1. Press USER PREF until you get to the F-C F menu page.
2. Press
+
hi
or
-
lo
to toggle between the °C and °F display options.
3. Press START to accept the changes and go back to user preferences menu display.
SETTING CONTINUOUS BAKE OR 12 HOUR ENERGY SAVING
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off
the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can
be programmed to override this feature for Continuous Baking.
Changing between 12 hour energy saving and continuous bake:
1. Press USER PREF until you get to the E S menu page.
2. Press
+
hi
or
-
lo
to toggle the energy saving setting on and off.
3. Press START to accept the changes and go back to user preferences menu display.
RESETTING TO DEFAULT FACTORY SETTINGS
The oven control can be set to return to its original factory settings. This includes: Setting the
Clock ON/OFF to ON, Setting the clock display mode to 12h, Display mode to Fahrenheit,
Setting the oven temperature adjustment to zero, Setting audio level to 5 and Enabling the 12h
energy saving mode. Reseting the control also erase the My Favorite recipes.
To reset the oven control to its original settings:
1. Press USER PREF until you get to the rSt no menu page.
2. Press
+
hi
or
-
lo
to select YES.
3. Press START to reset to default factory settings.
AUDIO CONTROL
The Audio Control feature allows the oven control to be operated without sounds or beeps
whenever necessary. If desired the control can be programmed for silent operation and later
returned to operating with all the default sounds and beeps. The volume of the beeps can also
be adjusted.
To change the audio mode or audio volume:
1. Press USER PREF until you get to the AUd menu page.
2. Press
+
hi
or
-
lo
to toggle between the available volume settings. AUd 5 for the highest volume
setting to AUd 1 for the lowest volume. AUd OFF to disable the beeps.
3. Press START to accept the changes and go back to user preferences menu display.