Filter
Top Products
7 STEAM
HEATING LIQUIDS
• Press the steam control and the corresponding indicator blinks for 20 seconds.
The machine will be ready to make steam when the indicator stops blinking and
remains lit.
• Place a jug with the liquid to be heated under the steam nozzle.
• Press and hold the start control within 10 seconds and wait for the steam function
to commence.
CAUTION: the desired function will be disabled if the start control is not pressed
within 10 seconds. It will then be necessary to repeat the procedure.
• The steam will continue to spray till the start control is released.
MILK FOR CAPPUCCINO: Pour some cold milk (100cc min.) in a deep jug and
heat it using steam. Agitate the milk jug a little and wait until the foam is
ready (one minute min.). To improve the result gently beat a little the jug on
the table after that the foam is ready.
18/37