Filter
Top Products
31/37
Connect the power cable as sho
r
INSTALLING THE MACHINE
• wn in
the figure. This machine is designed fo
a single phase voltage of 230V. The
power supply requires only outlets of
13A fuse and a double pole isolation
switch with at least 3 mm between
contacts.
• Lay the U base plate of the machine
Insert the L plates,
compens
on the shelf of the cabinet.
•
ating for any space. The
width of the housing unit the coffee
machine depends on the thickness of
the cabinet’s sides. six side plates
(four being 2 mm thick and two 1 mm
thick) are provided to compensate for
the different possible measures.