Filter
Top Products
electrolux electrolux
electrolux electrolux
electrolux control panel
1111
1111
11
GB
GrGr
GrGr
Gr
ease and charease and char
ease and charease and char
ease and char
coal filtercoal filter
coal filtercoal filter
coal filter
maintenance indicatormaintenance indicator
maintenance indicatormaintenance indicator
maintenance indicator
This hood is fitted with a device that
indicates when it is necessary to clean
the grease filter or the charcoal filter (if
the hood is used in the recirculation
version with a charcoal filter).
EFC 9670-9671-9673- 6670EFC 9670-9671-9673- 6670
EFC 9670-9671-9673- 6670EFC 9670-9671-9673- 6670
EFC 9670-9671-9673- 6670
On delivery, the hood is not supplied
with a charcoal filter, so the saturation
indicator will be disabled.
If the hood is to be used with a
charcoal filter
(EFC 90670-60670:(EFC 90670-60670:
(EFC 90670-60670:(EFC 90670-60670:
(EFC 90670-60670: the
hood is supplied with a charcoal filter),
the saturation
indicator light must be enabled as
follows:
Set in "
OFFOFF
OFFOFF
OFF" the hood.
Press buttons
44
44
4 and
55
55
5 simultaneously
and hold them for 3 seconds. At first
only the grease filter LED
FF
FF
F will light up,
but when the charcoal filter LED
CC
CC
C
lights up the saturation indicator will be
enabled.
To disable it: Press buttons
44
44
4 and
55
55
5
again simultaneously and hold
them for 3 seconds, until the charcoal
filter LED goes out.
Grease filter LED (F)
LED
FF
FF
F will start to flash when it is time
to clean the grease filter.
Cleaning will be necessary after 40
working hours. Always comply with the
maintenance instructions for the grease
filter.
Charcoal filter LED (C)
The charcoal filter LED
CC
CC
C will start to
flash when the charcoal filter needs to
be replaced.
This operation is necessary after
approximately 160 working hours.
Resetting the saturation indicator
After cleaning or replacing the filters,
press button
55
55
5 for 3 seconds until the
grease filter LED
FF
FF
F or the charcoal filter
LED
CC
CC
C stops flashing.