Filter
Top Products
electrolux electrolux
electrolux electrolux
electrolux control panel
1313
1313
13
GB
GrGr
GrGr
Gr
ease and charease and char
ease and charease and char
ease and char
coal filtercoal filter
coal filtercoal filter
coal filter
maintenance indicatormaintenance indicator
maintenance indicatormaintenance indicator
maintenance indicator
This hood is fitted with a device that
indicates when it is necessary to clean
the grease filter or the charcoal filter (if
the hood is used in the recirculation
version with a charcoal filter).
On delivery, the hood is not supplied
with a charcoal filter, so the saturation
indicator will be disabled.
If the hood is to be used with a
charcoal filter, the saturation
indicator light must be enabled as
follows:
Set in "
OFFOFF
OFFOFF
OFF" the hood.
Press buttons
33
33
3 and
44
44
4 simultaneously
and hold them for 3 seconds. At first
only the grease filter LED
FF
FF
F will light up,
but when the charcoal filter LED
CC
CC
C
lights up the saturation indicator will be
enabled.
To disable it: Press buttons
33
33
3 and
44
44
4
again simultaneously and hold
them for 3 seconds, until the charcoal
filter LED goes out.
Grease filter LED (F)
LED
FF
FF
F will start to flash when it is time
to clean the grease filter.
Cleaning will be necessary after 40
working hours. Always comply with the
maintenance instructions for the grease
filter.
Charcoal filter LED (C)
The charcoal filter LED
CC
CC
C will start to
flash when the charcoal filter needs to
be replaced.
This operation is necessary after
approximately 160 working hours.
Resetting the saturation indicator
After cleaning or replacing the filters,
press button
33
33
3 for 3 seconds until the
grease filter LED
FF
FF
F or the charcoal filter
LED
CC
CC
C stops flashing.