electrolux 19
ON/OFF SWITCH
FLEX
OUTLET
2
BB
BB
B
uilding over a kitchen unit withuilding over a kitchen unit with
uilding over a kitchen unit withuilding over a kitchen unit with
uilding over a kitchen unit with
doordoor
doordoor
door
Proper arrangements must be taken in
designing the furniture unit, in order to avoid
any contact with the bottom of the hob which
can be heated when it is operated. The
recommended solution is shown in diagram 3.
The panel fitted under the hob ("a") should
be easily removable to allow easy access if
technical assistance is needed. The space
behind the kitchen unit ("b") can be used for
connections.
Dimensions are given in mm.
3
ON/OFF SWITCH
FLEX
OUTLET
1
BB
BB
B
uilding over a cupboard or draweruilding over a cupboard or drawer
uilding over a cupboard or draweruilding over a cupboard or drawer
uilding over a cupboard or drawer
If the hob is to be installed above a cupboard or drawer it will be necessary to fit a
heat resistant board below the base of the hob on the underside of the work surface.
It is also recommended to carry out the electrical connection to the hob as shown
in diagrams 1 and 2.
Building In