Filter
Top Products
10
14 Remove button plug from upper left side of
door and place in upper right side of door.
Place door on lower LH hinge bracket.
Door Reversal
15 Install upper LH hinge bracket by installing
four (4) screws.
If door does not close properly after
reversing, the following actions may be taken:
a) Loosen lower hinge screws and align
door. Retighten screws.
b) Loosen upper hinge screws and align
door. Retighten screws.
c) Remove door gasket, turn 180°, and
reinstall.
Remove Button Plug
From Left Side And
Install On Right Side
16 Route door harness behind lower front panel.
Reconnect door harness to bracket.
17 Attach LH toe grille.
18 Reapply power.