Electrolux EI24WC65GS Beverage Dispenser User Manual


  Open as PDF
of 17
 
11
Starting the Unit
Your wine cooler / beverage center is shipped in the ON position; however, you may turn it ON or OFF by
pressing the ON/OFF for three (3) seconds.
Adjusting the Temperature
To accurately check the temperature, insert a reliable thermometer
into a plastic (non-breakable) bottle, partially filled with water.
Tighten the bottle cap securely.
Place the bottle in the desired area for 24 hours. Refrain from
opening the unit during the testing period. After 24 hours, check the
temperature of the water.
Press the (+) or (–) indicator to adjust the temperature to the desired
setting. The temperature display will begin to blink with the first
touch. Adjust the temperature by touching the key. After three
(3) seconds of inactivity, the display will beep to accept the new
temperature.
Start-UpandTemperatureControl
Factors that affect the internal temperatures of the cabinet
• Temperaturesetting
• Roomtemperaturewhereinstalled
• Numberoftimesthedoorisopenedandclosed
• Amountoftimetheinternallightisilluminated(thisaffectsprimarilywines/beveragesonthetop
racks/shelves)
• Installationindirectsunlightornearaheatsource
 previous next