Electrolux EI30EF35JS Range User Manual


 
20
Setting Oven Controls
Setting the clock
To set the clock for 1:30:
When the appliance is powered up for the first time or
when the electric supply to the appliance has been
interrupted, the display will flash "12:00" (Figure 1).
1. Press set clock.
2. Enter 130 using the numeric
keypad.
3. Press START to accept.
Fig. 1
Example
Step Press
The oven control is factory preset to display the
time of day with a 12-hour clock setting. The
display can be changed to provide the time of day
using a 24-hour clock display or the clock display
may be turned OFF.
When the clock display is turned OFF, the clock
continues to run in the background on the
previously chosen 12-hour or 24-hour mode.
Changing clock display mode
130
Be sure to set the clock with the correct time
of day before using the oven, especially
cooking with added time instructions.
The clock cannot be adjusted when the oven
is cooking, when the timer is active or during
self-clean.
If an invalid time of day is entered, the control
will sound a triple beep (error tone). Re-enter
a valid time of day and press START. If
CANCEL is pressed the clock will set for
12:00.
NOTES
Fig. 1 Fig. 2
To change clock display modes:
1. Press and hold set clock
for 6 seconds.
2. Press set clock to toggle between
"12 Hr dAY", "24 Hr dAY" or
"CLO OFF" display choices.
Release keypad when the desired
mode appears (Figures 1, 2 and
3).
3. Press START to accept.
Example
Step Press
Fig. 3
NOTE
The clock display mode cannot be modified
when the oven is active with any cooking
function or during self-clean.