Filter
Top Products
51
• Do not close the oven door until all the interior
oven racks are fully inserted and retracted to the
back of the oven.
• Do not hit the glass with pots, pans, or any other
object. The oven door glass may break or even
break at a later time unexpectedly.
• Scratching, hitting, jarring or stressing the oven
door glass may weaken its structure causing an
increased risk of breakage at a later time.
• You may use a glass cleaner on the outside of
the oven door glass. Do not spray or allow water
or the cleaner to enter or drip down into the oven
door vents. Spray cleaner on cloth first and then
wipe the oven door clean.
• Do not use strong oven cleaners, powders or
any harsh abrasive cleaning materials on the
outside of the oven door or glass.
• Never clean the oven door gasket.
Special door care instructions
Most oven doors contain glass that can
break. Read the following recommendations:
Changing the oven light
IMPORTANT
Be sure the range is unplugged and all parts are
COOL before replacing oven light. Wear a
leather glove for protection against possible
broken glass or burns.
CAUTION
The oven lights are located at the rear of the oven
cavity and are covered with a glass shield held by a
wire holder (Figure 1). The glass shield protects the
light bulb and must be in place whenever the oven
is in use.
To replace interior oven light bulb:
1. Turn electrical power off at the main source or
unplug the range.
2. Press wire holder to one side to release the
glass shield that covers the light bulb.
3. Replace light with a new 40 watt appliance
bulb.
4. Replace glass shield over bulb and snap wire
holder back into place.
5. Turn power on at main source (or plug the
appliance in).
6. The clock will then need to be reset. To reset,
see Setting clock in this Use & Care Guide.
wire
holder
glass
shield
Fig. 1
Care and Cleaning