Electrolux EI30ES55JS Range User Manual


 
41
Care & Cleaning
Cleaning Various Parts of Your appliance
Before cleaning any part of the appliance, be sure all controls are turned OFF and the appliance
is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR
CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.
GENERAL CLEANING
Surfaces
Glass, Painted and
Plastic Body Parts and
Decorative Trim
Control Panel
Porcelain Enamel
Broiler Pan and Grid
Stainless Steel,
Chrome
Decorative Trim, Oven
Racks, Oven Racks
Support
Oven Racks
Oven Door
Oven Door Gasket
Lower Oven
How to Clean
For general cleaning, use hot, soapy water and a cloth. For more dif cult soils and
built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to
60 minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any
of these materials; they can scratch.
Before cleaning the control panel, turn all controls to OFF. Lightly spray the control
panel with a liquid cleaner. Wipe with a soft cloth or paper towel. DO NOT use
abrasive cleaners or scouring pads. These can permanently damage the control panel
surface.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a
1:1 solution of clear water and ammonia. If necessary, cover dif cult spots with an
ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a
damp cloth, and then scrub with a soap- lled scouring pad. Rinse and wipe dry with a
clean cloth. Remove all cleaners or the porcelain may become damaged during future
heating.
Clean with hot, soapy water and a dishcloth. Rinse with clean water and a cloth.
Cover stubborn spots with an ammonia-soaked paper towel for 30 to 40 minutes.
Rinse. Cleaners made especially for stainless steel are recommended. Be sure to
rinse the cleaners as bluish stains may occur during heating and cannot be removed.
Oven racks and oven rack supports must be removed from the oven during the self-
clean cycle for cleaning. If they are not removed, the self-clean cycle will not start.
Clean them as described above.
To clean oven door, wash with hot, soapy water and a clean cloth. DO NOT immerse
the door in water or clean the oven door gasket.
The oven gasket located on the inner frame of the door and visible when the door
is opened is essential for a good seal. Care should be taken not to rub, damage or
remove the gasket.
To remove burned-on fat on oven walls, moisten soiled parts with household
ammonia, using a wet cloth. Complete cleaning with a damp cloth and use a ne steel
wool scouring agent if necessary.