Filter
Top Products
9
Surface Cooking
burner head
burner cap
burner cap lid
Fig. 1
Before setting surface
burners (con’t)
On round style burners, the burner cap lip
(Figure 1,) should fit snug into the center of burner
head and rest level. Refer to Figures 2 and 3 for
correct and incorrect burner cap placement. Once
in place, you may check the fit by gently sliding the
burner cap from side to side (Figure 4) to be sure it
is centered and firmly seated. When the burner cap
lip makes contact inside the center of the burner
head you will be able to hear the burner cap click.
Please note that the burner cap should NOT move
off the center of the burner head when sliding from
side to side.
Check and be sure that all oval style burner caps
are correctly in place on oval burner heads.
Installing burner grates
Make sure the burner grates are properly placed on
the cooktop before using the surface burners. The
grates are designed to rest inside the recess on the
cooktop.
To install burner grates, place grates flat-side down
and align into the cooktop recess. Grates should
rest flush against each other and against the sides
of the recess (see Figure 5).
Fig. 5
Fig. 4
Correct burner cap
placement
Fig. 2
Incorrect burner cap
placement
Fig. 3