Filter
Top Products
7
Operating Instructions
ENERGY OPTION SELECTIONS
Hi-Temp Wash
Sanitize
OPERATION SELECTIONS
Delay Start
The Delay Start option allows you to automatically
delay starting your dishwasher from 1 to 24 hours
on EIDW6305 and 2-4-6 on EIDW6105 models.
Press the DELAY START key until the desired delay
time shows in the STATUS window on the
EIDW6305. Press the DELAY START key until the
desired delay time LED is lit on EIDW6105. Display
will indicate the delay start time and will countdown
until cycle starts.
To cancel the DELAY START option and begin the
cycle before the delay period is over, press the
START/CANCEL pad.
Stemware
For lightly soiled China and Crystal. Water usage is
approximately 6.8 gallons. Wash time ranges from
approximately 85 to 92 mins.
Rinse
For rinsing dishes that will be washed later. Water
usage is approximately 2.8 gallons. Cycle time is
approximately 20 minutes.
When HI-TEMP option is selected, the dishwasher
heats water in the main wash to approximately
140°F (60°C). HI-TEMP ON will be displayed.
This increase in water temperature helps
dishwasher detergent remove food, grease and soil
from dishes more effectively and aids in drying.
HI-TEMP option can only be used with AUTO,
HEAVY and NORMAL cycles.
When HI-TEMP option is selected, the icon will light
up and remain on until the door is closed.
To sanitize your dishes and glassware, select the
SANITIZE option. SANITIZE ON will be displayed
when selected, the light surrounding the icon will
turn red until the START key is pressed or the door
is closed. This option heats the water temperature
in the final rinse to 157°F (69.4°C) and maintains
that temperature for 7 minutes. SANITIZE is
available in Auto, Heavy, and Normal cycles. Only
these sanitization cycles have been designed to
meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached. Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
at least 120°F (49°C).
If the SANITIZE option is selected, SANITIZED will
be displayed at the end of the cycle. The
sanitization criteria may not be satisfied if there is
an interruption of the cycle, a power failure occurs,
or if the incoming water temperature is below 120°F
(49°C). Sanitize will not display at the end of the
cycle if the NSF requirements for sanitization are not
reached.
Child Lock Controls/ Air Dry
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing and releasing
the AIR DRY icon for 3 seconds. An indicator light
on the lock graphic pad will illuminate when the
controls are locked and no new selections can be
made until the lock is released. To unlock the
controls, press the AIR DRY icon until the indicator
light goes out. If child lock is activated th
dishwasher will not work.