Using Your Gas Hob
Hob Ignition
Models without thermocouples:
●
To turn on
, place your pan onto the pansupports above
the burner you wish to use.
● Push in and turn the selected control knob
anticlockwise, to the full on symbol.
● If your hob has an igni
tion button or switch on the
fascia, press it in until your burner lights.
● If your hob has automatic ignition it will spark next to
the burner when you push in the control knob.
●
To simmer
, turn the control knob to the small flame
symbol. This will ensure that the flame is just large
enough to gently heat the contents of the pan.
●
To turn off
, turn the control knob clockwise to the ‘off’
position.
● Always make sure that your pans are placed correctly
on the burners as shown, and do not allow the flame
to extend over the base of the pan.
Models with thermocouples:
Ignition as above, but:
● Hold the control knob in for 15 seconds. Do not hold
the control knob in for any longer than 15 seconds. If
the burner fails to light within this time, release the
control knob and wait one minute before attempting to
re-ignite.
Energy Saving
● Position pans centrally over the elements.
● Only heat the amount of liquid you need.
● Once liquids have been brought to the boil, reduce the
heat setting to a simmer.
● Consider using a pressure cooker if possible.
● Vegetables in small pieces will cook quicker.
● Use a pan which is a close match to your element size.
● Smaller elements are ideal for simmering and stewing
in smaller pans, while the larger elements are ideal for
frying and boiling
Front
of the appliance.
Burner cap
Burner ring
Burner skirt
Electrode
Electrode
Viewed from the side
of the burner
Front
of the appliance.
Burner cap
Burner ring
Burner skirt
Thermocouple and electrode
Thermocouple
Electrode
Viewed from the side
of the burner
How can I tell if my hob
has thermocouples?
Picture A below:
shows a burner without
thermocouples.
Picture B below:
shows a burner with
thermocouples.
i
A
B
In the event of a power
failure, or the ignition
not working:
Push in and turn the
control knob to start the
gas, then hold a lighted
match or taper to the
burner until it lights.
i
Use flat based pans
which are the correct
size for your burners
and suitable for your
hob type.
We recommend the
following sizes:
100mm or 4” min.
250mm or 10” max.
Smaller or larger pan
sizes may lead to slower
cooking times.
i
4