Filter
Top Products
32
Cleaning and care
1 Warning: For cleaning, the appliance must be switched off and cooled
down.
Warning: For safety reasons, do not clean the appliance with steam jet or
high-pressure cleaning equipment.
Important: Do not use any abrasive cleaners, sharp scrapers or abra-
sive items.
Outside of the appliance
• Wipe the front of the appliance with a soft cloth and a solution of washing-
up liquid and warm water.
• With metal fronts use the cleaners that are commercially available.
Oven Interior
Oven lighting
You can switch on the oven light to make cleaning easier.
Cleaning
The walls that have a catalytic coating are self-cleaning. They absorb
splashes of fat while the oven is in use.
To support this self-cleaning process, we recommend heating the oven
without any food at regular intervals.
1.Remove all slide-in items from the oven.
2.Wash the oven floor with warm water and washing up liquid, then dry it.
3.Set the oven temperature to 250 °C.
4.Switch the oven off after one hour.
5.When the oven has cooled but is not cold, wipe off any remaining soiling
with a soft damp sponge.
1 Important! Do not use oven sprays or abrasive cleaners. Do not use soap
or other cleaning agents. Doing so can damage the catalytic surface.
3 Over time the catalytic coating can discolour slightly. This does not affect its
catalytic properties.
Accessories
Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after
each use and dry well. Soak briefly to make them easier to clean.