Filter
Top Products
38
5.Take hold of the door glass panels on
their upper edge one after the other
and take them out of the guide by pull-
ing them upwards..
Cleaning the door glass panels
Clean the door glass panels thoroughly with a solution of water and washing
up liquid. Then dry them carefully
Putting the door glass panels back.
1.From above insert the door glass pan-
els at an angle into the door profile at
the bottom edge of the door one after
the other and lower them.
3 Insert the smaller panel first, then the
larger panel.
2.Take hold of the door trim (B) at each
side, position it on the inside edge of
the door and plug the door trim (B) into
the upper edge of the door