Filter
Top Products
47
Replacing the centre glass panels
1.Insert the centre panels at an angle
from above into the section of the door
in which the handle is located, one af-
ter the other.
2.Lower the centre panels down and
push them towards the lower edge of
the door as far under the retaining
frame as they will go.
Replacing the upper glass panel
1.From above, insert the upper-most
panel at an angle into the section of the
door in which the handle is located.
2.Lower the panel. Place the glass
against the pressure spring at the han-
dle, and in front of the retaining frame
at the lower edge of the door. Push it
into the frame.
The glass plates must be firmly at-
tached.
Re-hang the door