Filter
Top Products
B
5. Hold the glass panels on their upper side
and one after the other pull them up and
out of their retainers.
Cleaning the glass door panels
Thoroughly clean the glass door panels using
a solution of water and washing-up liquid.
Then dry them carefully.
Replacing the glass door panels
1. Slide the glass door panels one after the
other into the retainers from above at an
angle and then lower the panels.
The two smaller panels should be inser-
ted first, then the larger panel.
2. Hold the door strip (B) on both sides, align
it with the inner edge of the door and
press the door strip (B) into the upper
edge of the door.
B
On the open side of the door strip (B)
there is a guide bar (C). This must be
pressed between the outer side of the
door and the corner (D). The seal (E)
must audibly click into place.
C
D
E
3. Open the door as far as it will go.
16 electrolux