Filter
Top Products
2x 3,5x16
Drill with drilling machine at high revolu-
tion and lowest torque.
Electrical Installation
• Enquiries regarding the installation of the
cooker point, if required, should be made
to your Regional Electricity Company to
ensure compliance with their regulations.
• The appliance socket switch should be
outside the cabinet but within 2m of the
appliance to make it accessible to switch
off the appliance in case of an emergency.
• To protect the hands, wear gloves when
lifting the oven into its housing.
Important! HOUSE CIRCUIT
Earth leakage and continuity tests must be
carried out before the appliance is connected
to the mains supply and re-checked after fit-
ting.
GETTING THINGS READY CHOICE OF
ELECTRICAL CONNECTION
There are three possible ways to connect
your appliance. In each case the appliance
should be operated using at least 6mm² twin
core and earth PVC insulated multicore ca-
ble. Please choose from the most appropri-
ate after reading the different methods :
a) By connecting to a cooker point (having
a double pole isolating switch with at least
3mm contact separation in all poles and
neutral) and protected with a fuse or min-
iature circuit breaker at your mains fuse
box.
b) By connecting the appliance together
with a hob directly to a cooker point(s).
Having a double pole isolating switch with
at least 3mm contact separation in all
poles and neutral.
c) If you wish to connect an oven and a hob
to a cooker point you can by connecting
the oven and hob separately to the cook-
20 electrolux