Filter
Top Products
10 electrolux control panel
Setting mode
Always remember that when:
- setting the water softener,
the appliance MUST be in setting
mode:
● Press On/Off button, ALL
programme button lights are
illuminated = appliance in setting
mode.
● Press On/Off button, ONLY a
programme button light is
illuminated = last performed or
selected programme still set.
In this case, to return to setting
mode, the programme has to be
cancelled.
To cancel a set programme or a
programme in progress
Press simultaneously and keep
pressed the two programme buttons
positioned over the writing Cancel,
until all the programme button lights
will illuminate. The programme has
been cancelled and the machine is
now in setting mode.
156998 62/0en 21-08-2006 11:26 Pagina 10