Electrolux ESF 64010 Dishwasher User Manual


 
something not working electrolux 29
Fault code Malfunction Possible cause Solution
The programme
does not start
The dishwasher’s
door has not been
properly closed
The main plug is
not plugged in
Delay start has
been set
The fuse has
blown out in the
household fuse
box
Close the door
Replace the fuse
Insert the main
plug
If dishes are to be
washed
immediately,
cancel the delay
start
Once these checks have been carried
out; close the dishwasher’s door and
switch on the appliance. Press the
button of the programme that was
running before the intervention of the
alarm. The programme will continue
from the point at which it was
interrupted.
If the malfunction or fault code
reappears contact the Service Force
Centre.
For other fault codes not described in
the above chart, please contact your
Service Force Centre.
Contact your local Service Force
Centre, quoting the model (Mod.),
product number (PNC) and serial
number (S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
So that you always have these
numbers at hand, we recommend you
to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .
156998 62/0en 21-08-2006 11:26 Pagina 29