Electrolux ESF 64010 Dishwasher User Manual


 
Electrical connection
Safety standards require the
appliance to be earthed. The
manufacturer accepts no liability
for failure to observe the above
safety precautions.
Prior to using the appliance for the
first time, ensure that the rated
voltage and type of supply on the
rating plate match that of the
supply where the appliance is to be
installed. The fuse rating is also to
be found on the rating plate.
Always plug the mains plug into a
correctly installed shockproof
socket.
Multi-way plugs, connectors and
extension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary, have the domestic
wiring system socket replaced. In
case that the electrical cable has to
be replaced, contact your local
Service Force centre.
The plug must be accessible after
the appliance has been installed.
Never unplug the appliance by
pulling on the cable. Always pull
the plug.
installation electrolux 37
156998 62/0en 21-08-2006 11:26 Pagina 37