Electrolux ESI 63010 Dishwasher User Manual


 
daily use electrolux 23
Select and start a washing
programme
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Close the dishwasher’s door.
4. Turn the programme knob until the
programme marker corresponds
with the desired programme (see
"Washing programmes" chart).
The On/Off indicator light
illuminates.
The indicator lights of the phases
foreseen for the programme start
flashing.
5. Press the start/cancel button, the
programme starts automatically
and the start/cancel indicator light
illuminates.
As soon as the programme starts,
the phase indicator lights turn off
except for the indicator light for the
phase in progress which will
remain lit with a static light.
During the running of the
programme, it is not possible to
change the selection made by
turning the programme knob in
correspondence of another
programme or the Off position.
If you want to change the running
programme you must cancel the
selection made (see "Cancel a
washing programme in progress").
Setting and starting the programme
with "delay start"
Allows the start of the programme
to be delayed by 3 hours.
1. After having selected the washing
programme, press the delay start
button.
The corresponding indicator light
illuminates.
2. Press the start/cancel button, the
countdown of the delay start
begins automatically.
The phase indicator lights turn off.
The opening of the door will
interrupt the countdown. Close the
door; the countdown will continue
from the point at which it was
interrupted.
Once the delay start has elapsed
the washing programme will start
automatically, the delay start
indicator light turns off while the
indicator light of the phase in
progress illuminates.
117989 84/0en 20-02-2007 17:10 Pagina 23