Filter
Top Products
26 electrolux daily use
Select and start a washing
programme
Select the washing programme and
delay start with the door slightly
opened. The start of the
programme or the countdown of
the delay start will occur only after
the closure of the door. Until then it
is possible to modify the settings.
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Press the On/Off button. The
dishwasher must be in setting
mode.
4. Press the button corresponding to
the required programme (see
"Washing programmes" chart).
Close the dishwasher door, the
programme starts automatically.
4. The opening of the door will
interrupt the countdown. Close the
door; the countdown will continue
from the point at which it was
interrupted.
5. Once the delay start has elapsed
the programme will start
automatically.
Setting and starting the programme
with "delay start"
1. After having selected the washing
programme, press the delay start
button until the number of hours for
the delay start will appear in the
digital display. The commencement
of the selected washing
programme can be delayed from 1
to 19 hours.
2. Close the dishwasher door, the
countdown starts automatically.
3. The countdown will decrease with
steps of 1 hour.
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress:
● Open the dishwasher door; the
programme will stop. Close the
door; the programme will start from
the point at which it was
interrupted.
Once the washing programme has
started, a point-shaped optical signal
appears on the floor beneath the
dishwasher’s door.
This optical signal will remain
illuminated for all the duration of the
washing programme.
If the appliance has been installed
higher up with a furniture door
mounted flush, the optical signal will
be no longer visible.
117990 17/0en 2-01-2007 11:46 Pagina 26