Electrolux ESL 67030 Dishwasher User Manual


 
daily use electrolux 27
Cancelling the "delay start"
To cancel a delay start in progress
you have to reset the dishwasher.
Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights will
illuminate.
Cancelling a delay start involves
also the cancelling of the washing
programme set. In this case you
have to set the washing
programme again.
Cancel a washing programme in
progress
Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights illuminate.
The washing programme has been
cancelled.
If a new washing programme is to
be selected, check that there is
detergent in the detergent
dispenser.
End of the washing programme
The dishwasher will automatically
stop and an audible signal informs
you of the end of the washing
programme.
Open the dishwasher door.
The end of programme light is
illuminated.
Zero appears in the digital display.
1. Switch off the dishwasher by
pressing the On/Off button.
2. Leave the dishwasher door ajar
and wait a few minutes before
removing the dishes; in this way
they will be cooler and the drying
will be improved.
When the washing programme has
ended, the optical signal on the floor
beneath the dishwasher’s door will
turn off.
The dishwasher’s drying system is
provided with a device that allows air
to circulate inside the dishwasher to
prevent residual steam recondensing
on the dishes as water droplets.
Once the washing programme has
ended this device operates
intermittently for other 20 minutes,
as long as the dishwasher is
switched on.
If the On/Off button is pressed or the
door is opened during these 20
minutes, the device will be
automatically cancelled.
117990 17/0en 2-01-2007 11:46 Pagina 27