Filter
Top Products
5
OPERATION
Freezer controls
Starting your appliance
Insert the plug into the wall socket. The appliance can
be activated by turning the thermostat knob
➄
beyond the «■» position. When the pilot light
➃
is
illuminated this shows that the appliance is on.
The freezer is switched off by turning knob
➄
to
position «■».
Temperature control
The temperature inside the freezer is regulated by a
thermostat with different temperature positions and
one «OFF» (
■
) position.
Position «min» = minimum cold
Position «max» = maximum cold
Turn the thermostat dial to the required position.
An intermediate position is usually the most suitable,
although the temperature will be affected by:
l
Room temperature
l
How often the door is opened
l
How much food is stored
l
Position of the appliance
In determining the correct temperature control setting
all these factors have to be considered and some
experimentation may be necessary.
➀
Push button for fast-freezing
➁
Fast-freezing indicator light (yellow)
➂
Warning light (red)
Before use
Remove all securing tapes. Wash inside the appliance
with lukewarm water and bicarbonate of soda (5 ml to
0.5 litre of water). Do not use soap or detergent as the
smell may linger. Dry thoroughly.
➃
Pilot light (green)
➄
Thermostat control knob
To obtain a lower temperature, turn the thermostat
control towards «max»; to obtain a higher
temperature turn the control towards «min».
When altering the temperature setting, allow 24 hours
for the temperature to stablise before making further
changes.
Warning light (red)
If the temperature warning light
➂
lights up, it
indicates that the temperature within the freezer has
reached a level where safe food storage is no longer
ensured (warmer than -12°C).
When the freezer is first switched on, the warning
light will stay on until the temperature has dropped to
a safe level for the storage of frozen food.
MAX
min
➁ ➂ ➃ ➄➀