Filter
Top Products
a) Setting manually
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to
position 1 or 2 (see table).
4. Replace the lower basket.
The dishwasher is factory set at
position 2.
b) Setting electronically
(The dishwasher must be switched off)
The dishwasher is factory set at level 5.
1. Press the On/Off button. All programme selection buttons indicator
lights will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme has been
selected.
The programme must be cancelled:
press simultaneously the function buttons
2
and
3
for about
2 seconds, the indicator light of the set programme button starts
flashing for about 2 seconds.
After about 2 seconds the indicator lights of all the programme
selection buttons will illuminate indicating that the set
programme has been cancelled and that the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of function buttons 1, 2 and 3 start flashing.
3. Press function button 1, the indicator lights of function buttons 2
and 3 turn off while the indicator light of the button 1 goes on
flashing, the digital display indicates the current level and a
sequence of intermittent audible signals are heard .
The current level is indicated by the number visible in the display
and the number of intermittent audible signals heard.
Example:
displayed + 5 audible signals = level 5.
Operating instructions
11
AA07
152963040en per uk.qxp 22/03/2004 9.53 Pagina 11