Filter
Top Products
Operating instructions
35
...the wash results are not satisfactory
The dishes are not clean
● The wrong washing programme has been selected.
● The dishes were arranged in such a way as to stop water
reaching all parts of the surface. The baskets must not be
overloaded.
● The spray arms do not rotate freely due to wrong arrangement
of the load.
● The filters in the base of the washing compartment are dirty or
incorrectly positioned.
● Too little or no detergent has been used.
● Where there are limescale deposits on the dishes; the salt
container is empty or the wrong level of the water softener has
been selected.
● The drain hose connection is not correct.
● The salt container cap is not properly closed.
The dishes are wet and dull
● Rinse aid was not used.
● The rinse aid dispenser is empty.
There are streaks, milky spots or a bluish coating on glasses
and dishes
● Decrease rinse aid dosing.
Water drops have dried onto glasses and dishes
● Increase rinse aid dosing.
● The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.
152963040en per uk.qxp 22/03/2004 9.54 Pagina 35