Filter
Top Products
Multi-Tab function
This appliance is equipped with the "Multi-Tab function", that allows the use of the
"Multi-Tab" combi detergent tablets.
These products are detergents with a combined cleaning, rinsing and salt functions.
They can also contain other different agents depending on which kind of tablets
you choose ("3 in 1", "4 in 1", "5 in 1" etc...).
Check whether these detergents are suitable for your water hardness. See the
manufacturers instructions.
Select the "Multi-Tab function " before the start of a washing programme.
Once this function is selected it will remain active also for the following washing
programmes.
With the selection of this function the inflow of rinse aid and salt from each re-
spective supply container is automatically deactivated and also the displayed
messages for salt and rinse aid are deactivated.
With the use of the "Multi-Tab function", the cycle durations may change. In this
case, in the display, the indication of the running time of the programme is
automatically updated.
Once the programme is running, the "Multi-Tab function " can NO longer be
changed. If you want to exclude the "Multi-Tab function " you have to cancel the
programme setting and then deactivate the "Multi-Tab function ".
In this case you have to set a washing programme (and desired options) again.
If the drying results are not satisfactory we recommend that you:
1. Fill up the rinse aid dispenser with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position 2.
The activation/deactivation of the rinse aid can only be possible with the MULTITAB
function active.
If you decide to turn back to the use of the standard detergent system we
advise that you:
1. Deactivate the MULTITAB function
2. Fill up the dispensers for salt and rinse aid again.
3. Adjust the water hardness setting to the highest setting and perform 1 normal
washing programme without loading any dishes.
Multi-Tab function
25