Filter
Top Products
31
CHOICE OF ELECTRICAL CONNECTION
· The appliance should be operated using at least
6mm
2
twin core and earth PVC insulated
multicore cable. Please choose from the most
appropriate after reading the different methods:-
· By connecting the appliance to a cooker point
having a double pole isolating switch with at least
3mm contact separation in all poles and
protected with a fuse or miniature circuit breaker
at your mains fuse box.
· If you wish to connect an oven and a hob to a
cooker point you can by connecting the oven and
hob separately to the cooker point. Oven and
hob units should be separately connected to a
cooker point. See Fig. 2.
NOTE: It is good practice to :
· Fit an Earth Leakage Circuit Breaker to your
house wiring.
· Wire your appliance to the latest IEE regulations.
PREPARING CABINET FOR FITTING OF
OVEN
· Make sure that the cabinet is the correct size for
the appliance to be fitted (Ref. Fig. 3).
· If the size is between 565-570mm, then the
cabinet should be modified so that at the screw
fixing points the recommended dimension of at
least 560-565mm is maintained. The modification
should ideally be localised to ensure that after
screw fitment the oven is securely fixed into
position.
· The cabinet must be stable and level by firmly
securing it to the wall or floor. If necessary,
make arrangements to ensure the shelf upon
which the oven will rest is level.
· When the appliance is installed ensure a
minimum gap of 2mm is maintained between the
trim on the bottom edge of the appliance, and
any corresponding door / panel underneath.