Filter
Top Products
27
Cutting Out
When fitting this product: read the
instructions on this page. When fit-
ting this unit in conjunction with
other units: read the instructions on
the following page.
For fitting this unit you will need a
Phillips screwdriver and the fixing
supplied (see fig.).
Distance from wall: Min. 150 mm
from flammable material Min. 50
mm from non-flammable material.
1. Saw a hole of the specified
dimensions in the worktop, see
“Technical data, installation
dimensions”.
2. Insert the unit in the hole and use
the fixing supplied in the slot that
is the best fit for the kitchen
worktop or the thickness
involved. Secure the fixing with a
manual screwdriver.