Filter
Top Products
7
Unpacking
Remove all packaging before positioning the appliance.
Remove the tape and the transport supports from
D the door sides
D inside the door hinges
D the shelves
Remove the transport support on the glass shelf by pushing
the support forward along the edge of the shelf until it
stops. Take hold of the rear edge of the glass shelf and pull
the shelf and transport support forward until the shelf tilts
and the transport support can be removed. Some models
are fitted with a silencing pad under the fridge. Do not
remov e this pad.
Installation and changing the
carbon filter
To maintain the best performance the carbon filter should
be changed once a year with normal usage.
New carbon filters can be purchased from your local Service
Force office.
On delivery the carbon filter is placed in a plastic bag to
secure the length of life of the carbon filter. Remove the bag
and the filter should be placed behind the grill before the
fridge is turned on.
The cover can be opened by simultaneously pressing the
lever on the right of grill (1) and turning the cover outward
(2). The carbon filter is then mounted (3) in the slot found
inthebackofthecover.
The filter should be handled carefully so carbon fragments
don't loosen from the surface.
Installing the cabinet
When two appliances are placed beside each other, the
spacers enclosed in the plastic wrapping should be glued
betw een the appliances. As shown in the illustration.
Make sure that the power plug is not squashed or
damaged by back of the product.
D A damaged power plug may overheat and cause a fire.
Do not place hea vy articles or the product itself on
the power cord.
D there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert t he
power plug.
D there is a risk of electric shock or fire.
If the fridge is placed in a corner and the side with the
hinges facing the wall, the distance between the wall and the
fridge must be at least 230 mm to allow the door to open
enough so that the shelves can be removed.
Check that the drain hose at the rear of the fridge
discharges into the drip tray.
The power plug must be accessible after installation of the
fridge .
1
2
3