Filter
Top Products
9
Door R eversal
1. Close the fridge and remove the plug from the electrical
socket.
2. Remove the ventilation grille. There is a part on the grille
that can be removed. Remove and reposition it on the
other side.
3. Put the fridge on a wooden board when it is laid down.
Later, when raising the fridge, it will be easier to grip under
the fridge thanks to the board.
4. On the upper part of the fridge. Put the hinge pin on the
other side.
5. On the lower part of the fridge.
a. Unscrew the hinge.
b. Remove the door-closing fittings from the hinge and put
the hinge pin on the other side. Then attach the supplied
door-closing fitting.
6. a. Remove the door-closing fitting from the bottom of the
door.
b. Remove the plastic plug from the corresponding hole on
the other side. Use a screwdriver to rock the plug loose.
Then secure the supplied door-closing fitting.
c. Secure the lower hinge.
Remove any play in the door by adjusting the height of the
low er hinge with the supplied spanner. Secure with the lock
nut.
7. Raise the cabinet and replace the ventilation grille.
8. To transfer the handle.
Unscrew the screws. Fit the handle onto the opposite side
by turning it one half circle. Pre ss the supplied plastic plugs
into the holes to which the handle was previously fitted.
9. Put the fridge in position. Check that the appliance is level.
See the section "Installing the fridge".
1
2
3
4
5b
5a
a
b
c
6
8