Filter
Top Products
5
SYMPTOM
There is no spark when lighting the
gas.
The gas ring burns unevenly.
SOLUTION
Check that the unit is plugged in and the
electrical supply is switched on.
Check that the RCCB has not tripped (if
fitted).
Check the mains fuse has not blown.
Check the burner cap and crown have
been placed correctly, e.g. after cleaning.
Check the main jet is not blocked and the
burner crown is clear of food particles.
Check the burner cap and crown have
been placed correctly, e.g. after cleaning.
Something not working
If the appliance is not working correctly, please carry out the following checks, before contacting
your local Service Force Centre.
IMPORTANT:
If you call out an engineer to a fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be made even if the appliance is under guarantee.