Filter
Top Products
11
WARNING:
during handling do not push or pull the unit: it may tip over or be
damaged.
B.1.2.2 Disposing of the packing
Packing materials should be disposed of accordance with the
binding laws in the country where the appliance is to be used.
Recyclable plastic parts are marked as follows:
polythene:outer wrapping, instructions booklet bag
PE
polypropylene: straps
PP
polystyrene foam: protective surround elements
PS
pressed board: protective surround elements
B.2.1 MATERIALS AND FLUIDS USED
All areas designed to come into contact with food are in steel
or covered in non-toxic plastic material. An HFC refrigerant, in
compliance with current legal standards, is used in the refrig-
erating units. The type of refrigerant gas used is stated on the
data plate.
B.2.2 DIMENSIONS, PERFORMANCE AND CONSUMPTION
External dimensions:
- Width 29.53” 750mm
- Depth with door closed 38.38” 975mm
- Depth with door open 65.35” 1660mm
- Height 83.07” 2110mm
Chamber dimensions:
- Width 24.80” 630mm
- Depth 34.25” 870mm
- Height 66.81” 1697mm
Gross capacity 245.68 gal 930 Iiters
Power supply 120V 1Ph 60Hz
Internal temp. range +32°F/+50°F 0°C/+10°C
Max. ambient temp. +109.4°F +43°C
Current input (°) 8 A
Refrigerant charge R134a 0.595lbs 270 gr
Refrigerant capacity (R134a) (¹) 526 W
Refrigerant capacity (R134a) (²) 1137 W
No. and type of defrostings (*) min 1 each 24h x max 30‘
(°) At room temperature 104°F/40°C.
(¹) At room temperature 89.6°F/32°C, condensation
temperature 131°F/+55°C and evaporation temperature
14°F/-10°C.
(²) ASHRAE PERFORMANCE ambient temperature 89.6°F/
+32°C, condensation temperature 131°F/+55°C and
evaporation temperature 44.96°F/+7.2°C.
(*)Auto (by electronic board)
B.2.3 PHYSICAL SAFETY FEATURES, HAZARDS
The appliance has no sharp or projecting parts.
The guards for the mobile and live parts are bolted on to the
cabinet to prevent accidental access.
B.2.4 POSITIONING
Install the equipment, taking all the safety precautions
required for this type of operation, also respecting
the relevant fire-prevention instructions.
Place the appliance in a ventilated room and away
from heat sources such as radiators or air-
conditioning systems, in order to allow the cooling
of the refrigerating unit components.
Never cover the condenser, not even temporarily, as
this may jeopardise the operation of both the
condenser and the appliance.
Make sure to position the appliance taking into consideration
the space needed for door opening.
Pay particular attention to levelling of the floor on which the
appliance stands, in order to ensure its optimal operation.
IMPORTANT:
level the appliance, otherwise its operation could be compro-
mised. The appliance must be sealed to the floor with silicone.
ADVICE:
the part of the floor on which the cabinet is placed should be
physically insulated from the rest of the supporting surface
by means of suitable thermal insulating material, and when
possible, by means of a heat barrier.
For optimum appliance operation, please follow recommended
spacing for equipment:
19.68 "
19.68 "
500 mm
500 mm
30.31"
30.31"
770 mm
770 mm
102.75 "
102.75 "
2610 mm
2610 mm
B.2 TECHNICAL DATA