Filter
Top Products
11
Ignition of the burners
• Push the knob and turn it left to the “large flame”
symbol.
• At the same time, push the electronic
ignition knob (see fig 12). Keep it pushed until
the gas ignites (1 spark / second).
or
Mains Failure
• Push the corresponding knob in completely
and turn it left to the “large flame” symbol and
ignite with a match.
• Release the knob and watch that the burner
has ignited. Upon ignition, adjust the flame as
required.
• If for any reason the flame should extinguish
turn off the relevant control knob, leave for at
least one minute and then re-ignite.
Extinguishing of burners
Turn the knob clockwise to mark «
».
Do not put anything on the hob that is
liable to melt.
fig. 12
Selecting the Correct burner
Above every knob there is a symbol for the
corresponding burner.
For good cooking results, always choose pans,
which correctly fit to the diameter of the burner
used (see fig. 13). Choose thick, flat bottom pots.
We recommend the flame is lowered as soon as
the liquid starts boiling.
For a correct ignition always keep the burner ring
and the spark plugs clean.
The following diameter pans can be used:
Correct use
Incorrect use
(
Power waste
)
fig. 13
Burner Power Diameter (mm)
(kW) min. max.
Rapid 2,60 165 260
Semi-
Rapid
2,00 140 220
Auxiliary 1,00 120 160
260 340Rapid Fish
Kettle
2,60
oval 180 x 280