Filter
Top Products
Installation
10
0
Unscrew the handle. Refit it on the
opposite side after having pierced
the plugs with a punch. Cover the
holes left open with the plugs
contained in the documentation
pack.
Changing over the freezer compartment door
0
Open the freezer compartment door a little way.
0
Using a small screwdriver, pess the
spring in the opening of the lower
door bearing slightly upwards and
take the door bearing out complete
with the door.
0
Turn the covering cap (M) round.
0
Turn the freezer compartment door
through 180° and fit the lower
door bearing into the lower bearing
cavity of the freezer compartment
door.
0
Lift the freezer compartment door
a little way upwards, fit it into the
upper door bearing, and at the
same time insert the lower door
bearing into the square hole. Small
upwards and downwards adjustments of the freezer compartment door
will make fitting easier.