Electrolux SANTO 3151 Refrigerator User Manual


 
11
Reversing The Door
The door hinges can be changed from right (as supplied) to left if
required to suit the location where the appliance is installed.
1
Warning! Unplug from the mains, before reversing the door.
0 1. Open the freezer door and with-
draw the plinth cover to the
front. At the same time, press on
the plinth cover from above.
Transfer the door bearing covers
on the plinth cover from left to
right.
2. With the freezer compartment
door closed, remove the cross-head
screws from the lower door bearing
and remove the door bearing
downwards.
Using a 10 mm flat wrench,
unscrew the door bolt from the
lower right-hand side of the
freezer compartment door and
screw it in again on the opposite
side.
3. Remove freezer compartment door
carefully to the front and set aside.
4. Unscrew the centre door bearing.
5. Remove the fridge compartment
door carefully to the front and
place on one side.
6. Reposition upper pivot pin to the
left side.