Filter
Top Products
10 818 18 12-00/2
Fitting the Door Handles
1
Caution! Do not overtighten the screws (max. 2 Nm) as you may
damage the door handles.
0 1. Screw the top handle bracket to the
handle rod (1). Fit the bottom han-
dle bracket on the lower left-hand
side of the door (2).
2. Fit the top handle bracket on the
top left-hand side of the door (3)
and screw the handle rod to the
bottom handle bracket (4).
Installation
Installation Location
The appliance should be installed in a well ventilated, dry room.
Energy use and efficient performance of the appliance is affected by
the ambient temperature.
The appliance should therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature
corresponds to the climate classification, for which the appliance is
designed.
The climate classification can be found on the rating plate, which is
located at the left on the inside of the appliance.