Filter
Top Products
LOCATION OF APPLIANCE
This appliance must not be installed in a bed-sitting room of volume less than 20m³ or in a bathroom, shower room or
garage. This is a type 'X' appliance, it is essential that the appliance is positioned as stated below (See Fig 1a) i.e.
shelves, wall cabinets and cooker hoods must be fitted a minimum of 787mm directly above the top of the hotplate (or
greater for cooker hoods if recommended by manufacturers instructions) and 400mm above the hotplate when fitted in
line with the outside of the appliance. If the units are intended to be fitted adjacent to the appliance but less than
400mm above the hotplate, then a minimum space of 100mm must be maintained between the sides of the unit and
the appliance (See Fig 1b). Curtains must not be fitted immediately behind the appliance or within 150mm of the sides
of the hotplate. If fitted next to or between two base units a minimum space of 1mm must be left between each unit
and the sides of the appliance. The levelling feet fitted to the appliance will achieve a nominal height to hotplate trims
of 900mm + 20mm.
Note :- L.P.G. cookers MUST NOT be installed below ground level i.e. in a basement or aboard any boat, yacht or
other vessel.
31
INSTALLATION INSTRUCTION
Fig.1b
Fig.1a