Filter
Top Products
28
Other Convenient Features
MORE OR LESS TIME
ADJUSTMENT
Should you discover that you like any of the
Sensor, Sensor Cook, Defrost, Auto Broil, Auto
Roast or Auto Bake settings slightly more done,
touch the POWER LEVEL pad once after touching
your choice of pads.
Should you discover that you like any of the
Sensor, Sensor Cook, Defrost, Auto Broil, Auto
Roast or Auto Bake settings slightly less done,
touch the POWER LEVEL pad twice after touching
your choice of pads.
TOUCH ON
TOUCH ON allows you to cook at 100% power
by touching the START/TOUCH ON pad con-
tinuously. TOUCH ON is ideal for melting cheese,
bringing milk to just below boiling etc.
The maximum cooking time is 3 minutes.
• Suppose you want to melt cheese on a piece
of toast.
PROCEDURE
Continuously touch the START/
TOUCH ON pad. The cooking
time will begin counting up.
START
TOUCH ON
When the cheese is melted to desired degree,
remove finger from START/TOUCH ON pad.
Convection Microwave Oven stops immediately.
NOTE:
1. Note time it takes for frequently used foods and
program that time in the future.
2. To use TOUCH ON
, touch pad within 1 minute
after cooking, opening and closing the door or
touching the STOP/CLEAR pad.
3. TOUCH ON can only be used 3 times in a row.
If more times are needed, open and close door
or touch STOP/CLEAR.
MULTIPLE SEQUENCE
COOKING
The oven can be programmed for up to 4 automatic
cooking sequences for the microwave mode and
2 automatic cooking sequences with preheat for
convection/mix mode, switching from one power
level setting to another automatically.
Sometimes cooking directions tell you to start on
one power level and then change to a different
power level. Your oven can do this automatically.
• Suppose you want to cook roast beef for 5
minutes at 100% and then continue to cook for
30 minutes at 50%.
PROCEDURE
1. First touch POWER
LEVEL once for 100%
power. Then enter
cooking time.
POWER
LEVEL
005
2. Touch POWER LEVEL
pad. Touch number pad
5 for 50% power.
Then enter second
cooking time.
POWER
LEVEL
5
3 0
0 0
3. Touch START/
TOUCH ON.
START
TOUCH ON
NOTE:
1. If POWER LEVEL is touched once, HIGH will
be displayed.
2. If you wish to know power level, simply touch
POWER LEVEL. As long as your finger is
touching POWER LEVEL, the power level will
be displayed.