818 35 94-01/2 29
Maintenance and Cleaning
Before any maintenance or cleaning work is carried out DISCONNECT
the appliance from the ELECTRICITY supply.
Internal Cleaning
0 1. Clean the inside and accessories with warm water and bicarbonate of
soda (5 ml to 0.5 litre of water). Rinse and dry thoroughly.
1
Warning!
• Do not use detergents, abrasive powders, highly perfumed cleaning
products, wax polishes or cleaning products containing bleach or
alcohol.
2. Regularly check the door seals and wipe clean to ensure they are clean
and free from debris.
External Cleaning
1
Warning!
• Do not use abrasive products
• There are sharp edges on the underside of the product so care should
be taken when cleaning.
1 Important: Do not use cleaning agents for stainless steel or other
aggressive or abrasive cleaning agents. The protective coat of lacquer
on the stainless steel surface can be damaged by these.
The coat of lacquer protects against finger prints and therefore
additional cleaning agents and maintenance products are no longer
required.
0 1. Wash the outer cabinet with warm soapy water.
2. After cleaning wipe with fresh water and rub dry.
2
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the appli-
ance once a year with a soft brush or a vacuum cleaner.