Filter
Top Products
30 818 35 94-01/2
What to do if ...
Correcting Malfunctions
Perhaps a malfunction has been caused by a minor error, which you can
correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
1
Warning! Freezers must only be repaired by trained personnel. Repairs
carried out by untrained personnel can lead to substantial danger for
the user. Please contact your local Service Force Centre for repairs or
service.
Malfunction Possible cause Remedy
Appliance does not
function, temperature
display is not lit.
Appliance is not switched
on.
Switch appliance on.
Mains plug is not inserted
or is loose.
Insert mains plug.
Fuse has blown or is
defective.
Check fuse, replace if
necessary.
Mains socket is defective.
Mains malfunctions are to
be corrected by an
electrician.
Red warning display
flashes, temperature dis-
play shows temperature
below -11 °C, door is
closed.
Temperature Warning.
Frozen goods have been
warmed to such an extent
that they have been
partially or completely
thawed.
Please refer to the section
"Control and Information
Systems".
Red warning display
flashes, warning tone
sounds, temperature dis-
play shows temperature
above -11 °C, door is
closed.
Temperature Warning.
Frozen goods have been
warmed to such an extent
that they have been
partially or completely
thawed.
Please refer to the section
"Control and Information
Systems".
Red warning indicator is
flashing, temperature dis-
play shows a square or a
letter.
A functions error has
occurred.
Please make a note of the
indicated error and inform
your local Service Force
Centre. Do not open the
appliance door again.